| ccp_alpha | Complexity parameter used for Minimal Cost-Complexity Pruning. The
subtree with the largest cost complexity that is smaller than
``ccp_alpha`` will be chosen. By default, no pruning is performed. See
:ref:`minimal_cost_complexity_pruning` for details
.. versionadded:: 0.22 | default: 0.0 |
| class_weight | Weights associated with classes in the form ``{class_label: weight}``
If None, all classes are supposed to have weight one. For
multi-output problems, a list of dicts can be provided in the same
order as the columns of y
Note that for multioutput (including multilabel) weights should be
defined for each class of every column in its own dict. For example,
for four-class multilabel classification weights should be
[{0: 1, 1: 1}, {0: 1, 1: 5}, {0: 1, 1: 1}, {0: 1, 1: 1}] instead of
[{1:1}, {2:5}, {3:1}, {4:1}]
The "balanced" mode uses the values of y to automatically adjust
weights inversely proportional to class frequencies in the input data
as ``n_samples / (n_classes * np.bincount(y))``
For multi-output, the weights of each column of y will be multiplied
Note that these weights will be multiplied with sample_weight (passed
through the fit method) if sample_weight is specified | default: null |
| criterion | | default: "gini" |
| max_depth | The maximum depth of the tree. If None, then nodes are expanded until
all leaves are pure or until all leaves contain less than
min_samples_split samples | default: null |
| max_features | The number of features to consider when looking for the best split:
- If int, then consider `max_features` features at each split
- If float, then `max_features` is a fraction and
`int(max_features * n_features)` features are considered at each
split
- If "auto", then `max_features=sqrt(n_features)`
- If "sqrt", then `max_features=sqrt(n_features)`
- If "log2", then `max_features=log2(n_features)`
- If None, then `max_features=n_features`
Note: the search for a split does not stop until at least one
valid partition of the node samples is found, even if it requires to
effectively inspect more than ``max_features`` features | default: null |
| max_leaf_nodes | Grow a tree with ``max_leaf_nodes`` in best-first fashion
Best nodes are defined as relative reduction in impurity
If None then unlimited number of leaf nodes | default: null |
| min_impurity_decrease | A node will be split if this split induces a decrease of the impurity
greater than or equal to this value
The weighted impurity decrease equation is the following::
N_t / N * (impurity - N_t_R / N_t * right_impurity
- N_t_L / N_t * left_impurity)
where ``N`` is the total number of samples, ``N_t`` is the number of
samples at the current node, ``N_t_L`` is the number of samples in the
left child, and ``N_t_R`` is the number of samples in the right child
``N``, ``N_t``, ``N_t_R`` and ``N_t_L`` all refer to the weighted sum,
if ``sample_weight`` is passed
.. versionadded:: 0.19 | default: 0.0 |
| min_impurity_split | Threshold for early stopping in tree growth. A node will split
if its impurity is above the threshold, otherwise it is a leaf
.. deprecated:: 0.19
``min_impurity_split`` has been deprecated in favor of
``min_impurity_decrease`` in 0.19. The default value of
``min_impurity_split`` has changed from 1e-7 to 0 in 0.23 and it
will be removed in 1.0 (renaming of 0.25)
Use ``min_impurity_decrease`` instead | default: null |
| min_samples_leaf | The minimum number of samples required to be at a leaf node
A split point at any depth will only be considered if it leaves at
least ``min_samples_leaf`` training samples in each of the left and
right branches. This may have the effect of smoothing the model,
especially in regression
- If int, then consider `min_samples_leaf` as the minimum number
- If float, then `min_samples_leaf` is a fraction and
`ceil(min_samples_leaf * n_samples)` are the minimum
number of samples for each node
.. versionchanged:: 0.18
Added float values for fractions | default: 1 |
| min_samples_split | The minimum number of samples required to split an internal node:
- If int, then consider `min_samples_split` as the minimum number
- If float, then `min_samples_split` is a fraction and
`ceil(min_samples_split * n_samples)` are the minimum
number of samples for each split
.. versionchanged:: 0.18
Added float values for fractions | default: 2 |
| min_weight_fraction_leaf | The minimum weighted fraction of the sum total of weights (of all
the input samples) required to be at a leaf node. Samples have
equal weight when sample_weight is not provided | default: 0.0 |
| random_state | Controls the randomness of the estimator. The features are always
randomly permuted at each split, even if ``splitter`` is set to
``"best"``. When ``max_features < n_features``, the algorithm will
select ``max_features`` at random at each split before finding the best
split among them. But the best found split may vary across different
runs, even if ``max_features=n_features``. That is the case, if the
improvement of the criterion is identical for several splits and one
split has to be selected at random. To obtain a deterministic behaviour
during fitting, ``random_state`` has to be fixed to an integer
See :term:`Glossary ` for details | default: null |
| splitter | | default: "best" |